{"id":2864,"date":"2025-01-01T18:13:41","date_gmt":"2025-01-01T18:13:41","guid":{"rendered":"https:\/\/gunowner-news.com\/?p=2864"},"modified":"2025-01-01T18:13:41","modified_gmt":"2025-01-01T18:13:41","slug":"get-to-know-schrade-in-three-knives","status":"publish","type":"post","link":"https:\/\/gunowner-news.com\/?p=2864","title":{"rendered":"Get to Know Schrade in Three Knives"},"content":{"rendered":"


\n<\/p>\n

\n

By Clayton Walker<\/a><\/p>\n

Q<\/span>uite a lot can happen in 20 years. To take the knife industry as a case in point, I would argue that the shifts that have occurred over the last two decades have been nothing short of seismic. Perhaps no company illustrates that turbulence quite like Schrade, a knife manufacturer whose history dates back to 1904.<\/p>\n

\n<\/picture>
Highlighted by models like the (from left to right) Divergent, Needle Serrated and Slyte, Schrade offers versatile and innovative products that demonstrate impressive quality and value across various price points.<\/figcaption><\/figure>\n

I think what the company is putting out today is extremely interesting and highly competitive in a market where consumers are more sophisticated than ever. If it\u2019s been some time since you\u2019ve paid the company attention, I think three models do a good job of crystallizing what they\u2019re up to and why a savvy consumer might want to take notice.<\/p>\n

A Little History<\/h2>\n

To appreciate where they are now, I think some words are warranted to understand where they\u2019ve been. I mentioned 1904: that was year zero when the Schrade Cutlery Company first put out their shingle in Walden, New York and announced they were open for business. The company\u2019s product line from that point up through the 1980s could charitably \u2014 perhaps affectionately \u2014 be described as the kinds of knives your grandfather probably used and carried. Think fixed-blade hunting knives and \u201ctraditional\u201d pocketknives with bone handles, and you\u2019ll have a good picture of the majority of the company\u2019s output.<\/p>\n

\"older\n<\/picture>
Schrade was once known predominately for small slipjoints, including its Old Timer series of knives.<\/figcaption><\/figure>\n

Indeed, Schrade\u2019s tagline throughout the 1990s for its \u201cOld Timer\u201d series was \u201cKnives like Granddad\u2019s.\u201d But by the dawn of the 21st<\/sup>\u00a0century, its line-up could fairly be called a little stodgy for a class of consumers that perhaps didn\u2019t\u00a0want<\/em>\u00a0to be carrying grandpa knives. Sensing the writing on the wall, Schrade was sold to a company that promptly moved all production overseas and began to crank out very low-priced knives.<\/p>\n

By the 2010s, that business model was under attack thanks to companies like CRKT, Cold Steel, Kershaw, and Spyderco. Each of these manufacturers competed with one another to offer great workmanship, durability, and progressively better materials to the American consumer. By the mid-2010s, there was really no excuse to be carrying a poorly made knife when we were spoiled for choice with so many great budget options.<\/p>\n

Perhaps not coincidentally, Schrade was sold in 2016 to American Outdoor Brands, who was promptly tasked with taking this historic company and delivering the quality discerning customers expected. Based on a quick inventory of what we can buy from Schrade in 2024, I\u2019d say that mission was successful.<\/p>\n

Schrade Divergent<\/h2>\n

Available for less than $30, Schrade\u2019s Divergent is as solid of a budget knife as they come in my opinion. Featuring G10 handles over stainless steel liners, a harpoon-style blade, and a blade made from the workmanlike AUS-8 steel, the Divergent is just about the archetype of a \u201cjack of all trades\u201d EDC piece.<\/p>\n

\"Schrade\n<\/picture>
The Divergent features a harpoon-style blade of just over 3\u201d, well suited to daily cutting tasks.<\/figcaption><\/figure>\n

It\u2019s not too small, nor too big. The blade stock is thick enough for rough use and difficult jobs, but thin enough behind the edge to slice and bite easily into a variety of materials. AUS-8 is a steel that isn\u2019t lauded for its edge retention, but it\u2019s tough, extremely stain-resistant, and can be easily sharpened by an amateur user back to the point where it will split hairs.<\/p>\n

The Divergent also allows you to experience the novelty of a very cool lock type at a cost just about everyone can afford. On this model, Schrade employs what is being called a \u201ccrossbar lock\u201d in common parlance, but the details have been thoughtfully attended to. It is a completely ambidextrous design that allows the blade to be opened or closed without the user ever having to get his or her fingers in the path of the cutting edge. For a $30 knife, the lock engages with confidence and authority on the Divergent, and the stop pin wedges itself behind the blade to ensure a rock-solid deployment. When disengaged, the blade retreats back into the handle with a satisfying \u201csnick.\u201d<\/p>\n

\"Schrade\n<\/picture>
Schrade\u2019s Divergent model gives consumers an affordable way of testing out a \u201ccrossbar\u201d lock. Scales are G10.<\/figcaption><\/figure>\n

Simply put, the Divergent is useful, fun, and delivers quality and performance far in excess to the cost Schrade is asking of it. No wonder it\u2019s been turning heads since its introduction, even among YouTubers who have built their subscriber numbers by featuring far more expensive fodder.<\/p>\n

The Schrade Slyte<\/h2>\n

Although the Slyte is just as EDC friendly as the Divergent, Schrade set out to court two very particular and different demographics with this model: customers who want envelope-pushing designs, and customers who want to buy American wherever possible. This knife gets both of those guys under the same tent.<\/p>\n

\"Schrade\n<\/picture>
The Slyte is a fetching piece of pocket art as much as it is a functional EDC knife.<\/figcaption><\/figure>\n

First, the Slyte has some very origami-like lines to it. The wharncliffe blade is chunky and angular, but it excels at daily tasks like breaking down boxes and making precise draw cuts. The most impressive aspect of this knife, however, is that it\u2019s only a quarter of an inch thick across the frame and weighs only 3.5 ounces, despite giving the user 3\u201d of cutting edge.<\/p>\n

\"Schrade\n<\/picture>
Schrade\u2019s Slyte is feature rich. The Wharncliffe blade is great for draw and push cuts, the knife sits deep in the pocket, and a frame lock adds additional strength. It\u2019s affordable and made by U.S. workers.<\/figcaption><\/figure>\n

Combine this with a blade made from extremely durable D2 tool steel, a frame lock mechanism, and a deep carry clip, and you\u2019ve got a product tailor made for those looking to \u201cmin-max\u201d their EDC choices. For such a thin knife, no edges are untowardly sharp, and the stonewashed finish applied to the stainless steel frame is rather fetching.<\/p>\n

\"Schrade\n<\/picture>
The Slyte is well-named as the knife is only a quarter inch wide across the frame. An easy carry, to say the least.<\/figcaption><\/figure>\n

To some, what will be just as important as the manufacturing and design specs is what\u2019s written on the blade: \u201cMade in USA.\u201d That Schrade is able to deliver a product that supports American families for under $60 \u2014 with good materials, a well-tuned detent, an excellent factory edge, and highly competitive design \u2014 is quite the accomplishment.<\/p>\n

The Needle Serrated<\/h2>\n

If one sat a bunch of knife junkies down in a room and asked them to name the most iconic fixed blades of all time, it\u2019d be a wonder if either the Gerber Mark II or the Sykes-Fairbairn Dagger didn\u2019t end up on that list. Shrade\u2019s Needle Serrated is a spiritual successor to these designs, though far more attainable and affordable to the average Joe.<\/p>\n

\"Schrade\n<\/picture>
Schrade\u2019s Needle Serrated is an affordable, double-edged dagger that follows in the footsteps of famous designs like the Gerber Mark II.<\/figcaption><\/figure>\n

It bears mentioning that not all knives are equally suited to any particular task. To wit: I would not want to use a machete to carve a Jack \u2018O Lantern, and I would not want to use any of Schrade\u2019s \u201cNeedle\u201d series to break down a cord of wood. However, take one look at this thing and tell me this isn\u2019t an impressive chunk of metal.<\/p>\n

Like the Divergent, Schrade utilizes AUS-8 steel in its construction of the Needle. Again, AUS-8 isn\u2019t known for being a wondersteel for edge retention, but it is tough and reasonably durable. I would further argue that edge retention is probably the least of a consumer\u2019s concerns on a knife so obviously positioned for the task of self-defense. What\u2019s the sense in dulling that edge through non-serious tasks? Almost always, a better tool is at hand for household work.<\/p>\n

\n
\n\t\t\t\t\"\"\/<\/p>\n

Live The Armory Life.<\/strong> The latest content straight to your inbox plus an automatic entry to each of our monthly gun\u00a0giveaways!<\/strong><\/a><\/p>\n<\/p><\/div>\n<\/p><\/div>\n

Such begs the question: what\u2019s the Needle actually good for? Let me first offer a caveat \u2014 I never want to be too nonchalant about the scary realities (legal and otherwise) of using a knife in defense of life and limb. However, I have seen a number of closed-circuit TV videos where would-be robbers and assailants faced a citizen with a knife. In a majority of those videos, when criminals realized it was a distinct possibility they would be stabbed or slashed as a result of their malfeasance \u2014 such as when a sizable blade blocked their approach to their victim \u2014 they had enough smarts to beat feet.<\/p>\n

In such a case, the Needle provides a law-abiding citizen with the kind of reach that serves as a serious deterrent. It is remarkably lithe in the hand. The Needle is a knife that says, in no uncertain terms,\u00a0\u201cBack off.\u201d<\/em><\/p>\n

\"Schrade\n<\/picture>
Lithe in the hand, this version of the Needle provides a full 6\u201d of reach. Serrations offer additional cutting utility.<\/figcaption><\/figure>\n

Note that Schrade wants less than thirty bucks for this thing. Again, I\u2019m not going to try to stab this through a car hood, and I also don\u2019t relish the idea of ever getting into a knife fight, but it has absolutely become part of a bugout bag or two.<\/p>\n

The Rest<\/h2>\n

Of course, these three knives don\u2019t represent the entirety of Schrade\u2019s product category. Their alpha class, for example, is also made in the USA with premium materials, and the company has a number of interesting \u201cout the front\u201d knives. On top of that, Schrade still manufactures a number of traditional designs under the \u201cUncle Henry\u201d sub-brand.<\/p>\n

However, I do think my three picks are neat, and I felt represented a good cross-section of what the company has to offer. If you\u2019re a knife junkie who may have once written this company off, or if you\u2019re a newcomer who hadn\u2019t previously heard of the brand, now\u2019s a great time to see what they have to offer. I\u2019m going to bet at least something in their line-up will pull at least a few dollars from your wallet.<\/p>\n

Editor\u2019s Note: Please be sure to check out The Armory Life Forum, where you can comment about our daily articles, as well as just talk guns and gear. Click the \u201cGo To Forum Thread\u201d link below to jump in and discuss this article and much more!<\/em><\/p>\n

Join the Discussion<\/span><\/h5>\n

Go to forum thread<\/a><\/p>\n

Featured in this article<\/span><\/h5>\n

\n\t\t\t\t
\n\t\t\t\t\t<\/span> \n\t\t\t\t\t\"Schrade\n<\/picture>\n <\/p>\n

Schrade Divergent Folder<\/span><\/h3>\n


\n\t\t\t\t<\/a>
\n\t\t\t\t
\n\t\t\t\t\t<\/span> \n\t\t\t\t\t\"Schrade\n<\/picture>\n <\/p>\n

Schrade Slyte Folder<\/span><\/h3>\n


\n\t\t\t\t<\/a>
\n\t\t\t\t
\n\t\t\t\t\t<\/span> \n\t\t\t\t\t\"Schrade\n<\/picture>\n <\/p>\n

Schrade Needle Serrated Fixed Blade<\/span><\/h3>\n


\n\t\t\t\t<\/a><\/section>\n<\/p><\/div>\n


\n
Source link <\/a><\/p>\n","protected":false},"excerpt":{"rendered":"

By Clayton Walker Quite a lot can happen in 20 years. To take the knife industry as a case in point, I would argue that the shifts that have occurred over the last two decades have been nothing short of seismic. Perhaps no company illustrates that turbulence quite like Schrade, a knife manufacturer whose history […]<\/p>\n","protected":false},"author":1,"featured_media":2865,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[],"class_list":["post-2864","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-uncategorized"],"_links":{"self":[{"href":"https:\/\/gunowner-news.com\/index.php?rest_route=\/wp\/v2\/posts\/2864","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/gunowner-news.com\/index.php?rest_route=\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/gunowner-news.com\/index.php?rest_route=\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/gunowner-news.com\/index.php?rest_route=\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/gunowner-news.com\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=2864"}],"version-history":[{"count":0,"href":"https:\/\/gunowner-news.com\/index.php?rest_route=\/wp\/v2\/posts\/2864\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/gunowner-news.com\/index.php?rest_route=\/wp\/v2\/media\/2865"}],"wp:attachment":[{"href":"https:\/\/gunowner-news.com\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=2864"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/gunowner-news.com\/index.php?rest_route=%2Fwp%2Fv2%2Fcategories&post=2864"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/gunowner-news.com\/index.php?rest_route=%2Fwp%2Fv2%2Ftags&post=2864"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}